X-ray Inspection System

X-ray Inspection System takes advantages of the penetrating power of X-ray to detect contamination. It can achieve a full range of contaminants inspection including metallic, non-metallic contaminants (glass, ceramic, stone, bone, hard rubber, hard plastic, etc.). It can inspect metallic, non-metallic packaging and canned products, and the inspection result will not be affected by temperature, humidity, salt content, etc.Recommended use of X-ray inspection systems1. Not only metal contaminants, but other non-metals such as stones, ceramic, glass as well.2. Aluminum film packaged food and metallic packaged food3. High salinity food, such as pickles which has strong product effect4. Canned food5. High requirements for the inspection of SUS 6. Defect detection, such as tablet defect.

X-ray Inspection System takes advantages of the penetrating power of X-ray to detect contamination. It can achieve a full range of contaminants inspection including metallic, non-metallic contaminants (glass, ceramic, stone, bone, hard rubber, hard plastic, etc.). It can inspect metallic, non-metallic packaging and canned products, and the inspection effect will not be affected by temperature, humidity, salt content, etc. IP69K X-ray machine is suitable for inspection of meat, sea food, wet products etc. Recommended use of X-ray inspection systems1. Not only metal contaminants, but other non-metals such as stones, ceramic, glass as well.2. Aluminum film packaged food and metallic packaged food3. High salinity food, such as pickles which has strong product effect4. Canned food5. High requirements for the inspection of SUS 6. Defect detection, such as tablet defect.

Smart X-ray inspection system is widely used in inspection of snacks products, metallic and non-metallic products. Except for metal, hard impurities such as glass, stone, bones, etc. can also be detected. It is not affected by the packaging, temperature and humidity of the product. The best inspection sensitivity(without product) reaches: SUS 0.5 mm, SUS Wire 0.3*2 mm, Ceramic/Glass 1.5 mm.

With special design, suitable for inspection of cans, jars and bottles.Inclined downward X-ray, Dual-beam X-ray, Triple-beam X-ray, Splitted triple beam X-ray are available.Features1. Easy connection with existed production line 2. Glass in glass, metal in metal detection3. High capacity and good accuracy4. Simultaneous inspection for contaminants and filling level 5. High-speed pusher rejecter 6. Good solution for canned product

Lax sealing and material stuffing are the first of several stubborn issues in the processing of snack foods, causing "leak oil", flowing into the subsequent production line, polluting the product and causing short-term food deterioration. Shanghai Techik launched the intelligent X-ray Inspection System, and could solve the unresolved problems of material clamping and oil leakage in aluminum foil packaging, plastic packaging, small bags, medium bags, vacuum packaging and etc.Features:1. Contaminants Detection2. Oil Leakage and Stuffing Detection3. Online Weighing4. Visual Inspection5. Flexible Solution6. TIMA Platform

Bulk Product Green Beans Intelligent X-ray Inspection System.  The worm eye recognition inspection of red bean. Kidney bean can reach 60%-90% of net selection rate.Thin plastic, thin glass, mud, stones, ties, buttons, cigarette butts, embedded steel and other impurities can be screened and eliminated accurately and efficiently.Machine components:Vibration device + X-ray inspection system+32/48/72 air jet rejecter system

Techik Packaged Food Sealing, Stuffing, Leakage X-ray Inspection Machine, with high-speed high-definition detector, can detect and accurately reject the sealing quality of oil and bulk packaging. For example: oil leakage sealing, sealing with material pinched in bag mouth, oily juice contamination, etc. In the production process of packaged food, the bulk food is put into the packaging bag, and then sealed on the packaging machine. During the production, the product will be packed and then will be sent to sealing machine which will possibly appear less airproof and product stuck. If this kind of product flows into the subsequent production line, it is more likely to pollute the subsequent production line. If such kind of products are sold to customers, it will absolutely pose negative impact on product brands.

The X-ray Inspection Machines manufacturers utilize the penetrating ability of x-rays and the clear imaging function. According to the imaging brightness and the proportion of the area occupied by the nuts, it can detect defects that cannot be detected by vision, such as nut atrophy and wormholes. Replace the traditional water buoyancy selection, improve the good fruit rate to more than 95% Macadamia nuts, empty shells, wormholes, Test  walnut, empty shell, Insect eyes of almonds

High-Configuration Bulk Products X-ray Inspection System is widely used for pre-packaging product like nuts, grains, corns, raisins, sunflower seeds, bean, frozen fruits, cashew.Contaminants: metal contaminants, non-metal contaminants including glass, stone, ceramic, hard rubber, insects, stick, mould, wormhole, shell, germination, etc.Machine components:Vibration device + X-ray inspection system + 32/48/72 air jet rejecter systemVibration device to make sure material pass through the X-ray steadily and even, increasing the inspection sensitivity and rejecter accuracy.X-ray inspection system with unique software, to make sure contaminants inspection.32/48/72 air jet rejecter system, to make sure minimum quantity of waste.X-ray inspection system and air jet rejecter system are integrated in one frame, eventually achieving easy installation and parameter setting.

Food X-ray Inspection Equipment takes advantage of the penetrating power of X-ray to detect contamination. It can achieve a full range of contaminants inspections including metallic, and non-metallic contaminants (glass, ceramic, stone, bone, hard rubber, hard plastic, etc.). It can inspect metallic, non-metallic packaging, and canned products, and the inspection result will not be affected by temperature, humidity, salt content, etc. Recommended use of X-ray inspection systems for Can Food1. Not only metal contaminants, but other non-metals such as stones, ceramic, glass, and hard bones as well.2. Shielding Function especially Can shielding and Boundary shielding for can food3. Accurate and fast rejector system for can food 

Food X-ray Inspection Equipment takes advantages of the penetrating power of X-ray to detect contamination. It can achieve a full range of contaminants inspection including metallic, non-metallic contaminants (glass, ceramic, stone, bone, hard rubber, hard plastic, etc.). It can inspect metallic, non-metallic packaging and canned products, and the inspection result will not be affected by temperature, humidity, salt content, etc.Recommended use of X-ray inspection systems1. Not only metal contaminants, but other non-metals such as stones, ceramic, glass as well.2. Aluminum film packaged food and metallic packaged food3. High salinity food, such as pickles which has strong product effect4. Canned food5. High requirements for the inspection of SUS 6. Defect detection, such as tablet defect.

Techik Smart Food X-ray Inspection Equipment provides reliable inspection solutions to food industry. The X-ray inspection machine can detect contamination in packaged and unpackaged food (either it is liquid, semi-solid or solid.), including meat, seafood, vegetables, fruit, agricultural food and etc. Adopting Techik X-ray Inspection System is the easiest way to keep your company's brand and reputation, giving your client satisfaction and safety.